Metal Detector
Working Principle
① Inlet
② Scanning Coil
③ Control Unit
④ Metal impurity
⑤ Flap
⑥ Impurity Outlet
⑦ Product Outlet
Product falls through the scanning coil ②, when metal impurity④ is detected, the flap ⑤is activated and metal ④ is ejected from impurity outlet⑥.
Feature of RAPID 5000/120 GO
1)Diameter of the Pipe of Metal Separator: 120mm; Max. Throughput: 16,000 l/h
2)Parts in touch with material: stainless steel 1.4301(AISI 304), PP pipe, NBR
3)Sensitivity adjustable: Yes
4)Drop height of bulk material : Free fall, maximum 500mm above equipment top edge
5)Max Sensitivity: φ 0.6 mm Fe ball, φ 0.9 mm SS ball and φ 0.6 mm Non-Fe ball(without consideration of product effect and ambient disturbance)
6)Auto-learn function: Yes
7)Type of protection: IP65
8)Reject duration: from 0.05 to 60 sec
9)Compression air: 5 - 8 bar
10)Genius One control unit: clear and fast to operate on 5“ touchscreen, 300 product memory, 1500 event record, digital processing
11)Product tracking: automatically compensate slow variation of product effects
12)Power supply: 100 - 240 VAC (±10%), 50/60 Hz, single phase. Current consumption: approx. 800 mA/115V , approx. 400 mA/230 V
13)Electrical connection:
Input:
“reset” connection for possibility of an external reset button
Output:
2 potential-free relay switchover contact for external “metal” indication
1 potential- free relay switchover contact for external “error” indication
