machines
-
Horizontal Screw Conveyor
♦ Length: 600mm (center of inlet and outlet)
♦ pull-out, linear slider
♦ The screw is fully welded and polished, and the screw holes are all blind holes
♦ SEW geared motor, power 0.75kw, reduction ratio 1:10 -
Sieve
♦ Screen diameter: 800mm
♦ Sieve mesh: 10 mesh
♦ Ouli-Wolong Vibration Motor
♦ Power: 0.15kw*2 sets
♦ Power supply: 3-phase 380V 50Hz
♦ Brand: Shanghai Kaishai
♦ Flat design, linear transmission of excitation force
♦ Vibration motor external structure, easy maintenance
♦ All stainless steel design, beautiful appearance, durable
♦ Easy to disassemble and assemble, easy to clean inside and outside, no hygienic dead ends, in line with food grade and GMP standards -
Metal Detector
Basic Information of Metal Separator
1)Detection and separation of magnetic and non-magnetic metal impurities
2)Appropriate for powder and fine-grained bulk material
3)Metal separation using a reject flap system (“Quick Flap System”)
4)Hygienic design for easy cleaning
5)Meets all IFS and HACCP requirements
6)Complete Documentation
7)Outstanding ease of operation with product auto-learn function and latest microprocessor technology -
Double Screw Conveyor
♦ Length: 850mm (center of inlet and outlet)
♦ Pull-out, linear slider
♦ The screw is fully welded and polished, and the screw holes are all blind holes
♦ SEW geared motor
♦ Contains two feeding ramps, connected by clamps -
SS Platform
♦ Specification: 25000*800mm
♦ Partial width 2000mm, used to install metal detector and vibrating screen
♦ Guardrail height 1000mm
♦ Mount upwards to the ceiling
♦ All stainless steel construction
♦ Contains platforms, guardrails and ladders
♦ Anti-skid plates for steps and tabletops, with embossed pattern on the top, flat bottom, with skirting boards on the steps, and edge guards on the tabletop, edge height 100mm
♦ The guardrail is flat steel welded -
Bag feeding table
Specifications: 1000*700*800mm
All 304 stainless steel production
Leg specification: 40*40*2 square tube -
Belt conveyor
♦ Overall length: 1.5 meters
♦ Belt width: 600mm
♦ Specifications: 1500*860*800mm
♦ All stainless steel structure, transmission parts are also stainless steel
with stainless steel rail
♦ The legs are made of 60*30*2.5mm and 40*40*2.0mm stainless steel square tubes
♦ The lining plate under the belt is made of 3mm thick stainless steel plate
♦ Configuration: SEW gear motor, power 0.55kw, reduction ratio 1:40, food-grade belt, with frequency conversion speed regulation -
Bag UV Sterilization Tunnel
♦ This machine is composed of five sections, the first section is for purging and dust removal, the second, third and fourth sections are for ultraviolet lamp sterilization, and the fifth section is for transition.
♦ The purge section is composed of eight blowing outlets, three on the upper and lower sides, one on the left and one on the left and right, and a snail supercharged blower is randomly equipped.
♦ Each section of the sterilization section is irradiated by twelve quartz glass ultraviolet germicidal lamps, four lamps on the top and bottom of each section, and two lamps on the left and right. The stainless steel cover plates on the upper, lower, left, and right sides can be easily removed for easy maintenance.
♦ The entire sterilization system uses two curtains at the entrance and exit, so that the ultraviolet rays can be effectively isolated in the sterilization channel.
♦ The main body of the whole machine is made of stainless steel, and the drive shaft is also made of stainless steel -
Dust collector
Under pressure, the dusty gas enters the dust collector through the air inlet. At this time, the airflow expands and the flow rate decreases, which will cause large particles of dust to be separated from the dusty gas under the action of gravity and fall into the dust collection drawer. The rest of the fine dust will adhere to the outer wall of the filter element along the direction of the airflow, and then the dust will be cleaned by the vibrating device. The purified air passes through the filter core, and the filter cloth is discharged from the air outlet at the top.
-
Belt Conveyor
♦ Diagonal length: 3.65 meters
♦ Belt width: 600mm
♦ Specifications: 3550*860*1680mm
♦ All stainless steel structure, transmission parts are also stainless steel
♦ with stainless steel rail
♦ The legs are made of 60*60*2.5mm stainless steel square tube
♦ The lining plate under the belt is made of 3mm thick stainless steel plate
♦ Configuration: SEW geared motor, power 0.75kw, reduction ratio 1:40, food-grade belt, with frequency conversion speed regulation -
Automatic bag slitting and Batching station
The dust-free feeding station is composed of feeding platform, unloading bin, dust removal system, vibrating screen and other components. It is suitable for unpacking, putting, screening and unloading of small bags of materials in pharmaceutical, chemical, food, battery materials and other industries. Due to the function of the dust collection fan when unpacking, the material dust can be prevented from flying everywhere. When the material is unpacked and poured into the next process, it only needs to be manually unpacked and put into the system. The material passes through the vibrating screen (safety screen), which can intercept large materials and foreign objects, so as to ensure that the particles that meet the requirements are discharged.
-
Pre-mixing Platform
♦ Specifications: 2250*1500*800mm (including guardrail height 1800mm)
♦ Square tube specification: 80*80*3.0mm
♦ Pattern anti-skid plate thickness 3mm
♦ All 304 stainless steel construction
♦ Contains platforms, guardrails and ladders
♦ Anti-skid plates for steps and tabletops, with embossed pattern on the top, flat bottom, with skirting boards on the steps, and edge guards on the tabletop, edge height 100mm
♦ The guardrail is welded with flat steel, and there must be room for the anti-skid plate on the countertop and the supporting beam below, so that people can reach in with one hand