Pre-mixing Machine

Short Description:

The horizontal ribbon mixer is composed of a U-shaped container, a ribbon mixing blade and a transmission part; the ribbon-shaped blade is a double-layer structure, the outer spiral gathers the material from both sides to the center, and the inner spiral collects the material from the center to both sides. Side delivery to create convective mixing. The ribbon mixer has a good effect on the mixing of viscous or cohesive powders and the mixing of liquid and pasty materials in the powders. Replace the product.

Send email to us

Product Detail

Product Tags

Main Features

Using PLC and touch screen control, the screen can display the speed and set the mixing time, and the mixing time is displayed on the screen.
The motor can be started after pouring the material
The cover of the mixer is opened, and the machine will stop automatically; the cover of the mixer is open, and the machine cannot be started
With dump table and dust hood, fan and stainless steel filter
The machine is a horizontal cylinder with a symmetrically distributed structure of single-axis double-screw belts. The barrel of the mixer is U-shaped, and there is a feeding port on the top cover or the upper part of the barrel, and a spraying liquid adding device can be installed on it according to the needs of the user. A single-shaft rotor is installed in the barrel, and the rotor is composed of a shaft, a cross brace and a spiral belt.
A pneumatic (manual) flap valve is installed in the center of the bottom of the cylinder. The arc valve is tightly embedded in the cylinder and is flush with the inner wall of the cylinder. There is no material accumulation and mixing dead angle. No leaks.
The disconnected ribbon structure, compared with the continuous ribbon, has a greater shearing motion on the material, and can make the material form more eddies in the flow, which speeds up the mixing speed and improves the mixing uniformity.
A jacket can be added outside the barrel of the mixer, and cooling or heating of the material can be achieved by injecting cold and hot media into the jacket; cooling is generally pumped into industrial water, and heating can be fed into steam or electric conduction oil.

Technical Specification

Model	SP-R100
Fully Volume	108L
Turning Speed	64rpm
Total Weight	180kg
Total Power	2.2kw
Length（TL）	1230
Width（TW）	642
Height（TH）	1540
Length（BL）	650
Width（BW）	400
Height（BH）	470
Cylinder radius（R）	200
Power Supply	3P AC380V 50Hz

Deploy List

No.	Name	Model Specification	PRODUCING AREA,Brand
1	Stainless steel	SUS304	China
2	Motor		SEW
3	Reducer		SEW
4	PLC		Fatek
5	Touch screen		Schneider
6	Electromagnetic valve		FESTO
7	Cylinder		FESTO
8	Switch		Wenzhou Cansen
9	Circuit breaker		Schneider
10	Emergency switch		Schneider
11	Switch		Schneider
12	Contactor	CJX2 1210	Schneider
13	Assist contactor		Schneider
14	Heat relay	NR2-25	Schneider
15	Relay	MY2NJ 24DC	Japan Omron
16	Timer relay		Japan Fuji