machines
-
Pre-mixing Machine
The horizontal ribbon mixer is composed of a U-shaped container, a ribbon mixing blade and a transmission part; the ribbon-shaped blade is a double-layer structure, the outer spiral gathers the material from both sides to the center, and the inner spiral collects the material from the center to both sides. Side delivery to create convective mixing. The ribbon mixer has a good effect on the mixing of viscous or cohesive powders and the mixing of liquid and pasty materials in the powders. Replace the product.
-
Storage and weighting hopper
♦ Storage volume: 1600 liters
♦ All stainless steel, material contact 304 material
♦ The thickness of the stainless steel plate is 2.5mm, the inside is mirrored, and the outside is brushed
♦ With weighing system, load cell: METTLER TOLEDO
♦ Bottom with pneumatic butterfly valve
♦ With Ouli-Wolong air disc -
Double Spindle paddle blender
The double paddle pull-type mixer, also known as the gravity-free door-opening mixer, is based on long-term practice in the field of mixers, and overcomes the characteristics of constant cleaning of horizontal mixers. Continuous transmission, higher reliability, longer service life, suitable for mixing powder with powder, granule with granule, granule with powder and adding a small amount of liquid, used in food, health products, chemical industry, and battery industries.
-
SS Platform
♦ Specifications: 6150*3180*2500mm (including guardrail height 3500mm)
♦ Square tube specification: 150*150*4.0mm
♦ Pattern anti-skid plate thickness 4mm
♦ All 304 stainless steel construction
♦ Contains platforms, guardrails and ladders
♦ Anti-skid plates for steps and tabletops, with embossed pattern on the top, flat bottom, with skirting boards on the steps, and edge guards on the tabletop, edge height 100mm
♦ The guardrail is welded with flat steel, and there must be room for the anti-skid plate on the countertop and the supporting beam below, so that people can reach in with one hand -
Buffering Hopper
♦ Storage volume: 1500 liters
♦ All stainless steel, material contact 304 material
♦ The thickness of the stainless steel plate is 2.5mm, the inside is mirrored, and the outside is brushed
♦ side belt cleaning manhole
♦ with breathing hole
♦ With pneumatic disc valve at the bottom, Φ254mm
♦ With Ouli-Wolong air disc -
Final Product Hopper
♦ Storage volume: 3000 liters.
♦ All stainless steel, material contact 304 material.
♦ The thickness of the stainless steel plate is 3mm, the inside is mirrored, and the outside is brushed.
♦ Top with cleaning manhole.
♦ With Ouli-Wolong air disc.
♦ with breathing hole.
♦ With radio frequency admittance level sensor, level sensor brand: Sick or the same grade.
♦ With Ouli-Wolong air disc.